Fiber optic pigtails are basically used to splice with the fiber so that they can be connected to the patch panel or equipment. They also present a feasible and reliable solution for easier fiber termination, effectively saving operating time and labour cost

Select the number of specifications

Please check the product information you want!

Product Detail Specification

Feature

1. Different fiber diameter for option: 0.9mm, 2mm or 3mm
2. Any length is available: 1m,1.5m or other length you required.

3. Telecom level and insertion loss below 0.3 db.

4. SC,LC,FC,ST connector for option.

5. The pigtail corresponds to the international standard IEC 874-10.

Parameter	SC, LC,FC,ST Fiber patch cord
	SM			MM
	PC	UPC	APC	PC
Insertion loss(typical)	≤0.3	≤0.3	≤0.3	≤0.3
Return loss	≥45	≥50	≥60	≥30
Interchangeability	≤0.2dB
Salt Spray	≤0.1dB
Repeatability	≤0.1dB (1000 times)
Vibration	≤0.2dB (550Hz 1.5mm)
Temperature	≤0.2dB (-40+85 sustain 100 hours)
Humidity	≤0.2dB (+25+65 93 R.H.100 hours)
Apex Offset	0μm ~ 50μm
Radius of Curvature	7mm ~ 25mm

No comment

Product Detail

Feature

1. Different fiber diameter for option: 0.9mm, 2mm or 3mm
2. Any length is available: 1m,1.5m or other length you required.

3. Telecom level and insertion loss below 0.3 db.

4. SC,LC,FC,ST connector for option.

5. The pigtail corresponds to the international standard IEC 874-10.

Specification

Parameter	SC, LC,FC,ST Fiber patch cord
	SM			MM
	PC	UPC	APC	PC
Insertion loss(typical)	≤0.3	≤0.3	≤0.3	≤0.3
Return loss	≥45	≥50	≥60	≥30
Interchangeability	≤0.2dB
Salt Spray	≤0.1dB
Repeatability	≤0.1dB (1000 times)
Vibration	≤0.2dB (550Hz 1.5mm)
Temperature	≤0.2dB (-40+85 sustain 100 hours)
Humidity	≤0.2dB (+25+65 93 R.H.100 hours)
Apex Offset	0μm ~ 50μm
Radius of Curvature	7mm ~ 25mm